Oxygen Cylinder Filling and Transfilling Equipment

ProRack Gas Control Products asdasd asfasf asfasfas asfasfasf as asd drh df dfgdfdf fgd fgdfh dfgsfgssdfgdsfg dfhdfh dfhdfhdfhdfh dfhdfhdfh dfh dfdfhdfh dfhdfhdxfhd dfhdfhdfh dxfdfh dfh

Single to Single Cylinder

• sersefsdgsdg
• sdgsdgsdg

Oxygen Transfills

• sersefsdgsdg
• sdgsdgsdg

Large Volume Filling Systems

• sersefsdgsdg
• sdgsdgsdg

‍

See catalog sheet for full specifications

Compressed Gas Cylinder Valves for Various Gases, Aluminum and Steel Cylinders

ProRack Gas Control Products stocks a large inventory of compressed gas cylinder valves for Acetylene, Inert, Oxygen, Breathing Air and Hydrogen to name a few. Valves are available from small to large cylinders up to 6000PSI service pressure.

ACETYLENE VALVES

• Small Wrenchtight B & MC Valves
• Small Handtight B & MC Valves
• Large CGA510 Acetylene Valves

MEDICAL VALVES

• Vertical Outlet Oxygen Valves
• Pin Index Medical Valves
• Chrome Plated Brass Valves

BRASS VALVES

• O-Ring Style Brass Valves for Pressure to 3000PSI
• Double O-Ring Ultra High Brass Valves for Pressures to 6000PSI

SPECIAL VALVES

• Residual Pressure Valves
• Dual Port High Pressure Valves
• Nitrous Oxide Racing Valves

‍

Compressed Gas Valves Features

• All valves exceed CGA V1, V9, S1.1 and G 4.1 recommendations by Compressed Gas Association (CGA)
• All valves are cleaned and bagged for oxygen service regardless of the gas service.
• All tapered threads are supplied with PTFE inlet tape ready for cylinder installation.

‍

See catalog sheet for full specifications

Gas Plant & Cryogenic Equipment

ProRack Gas Control Products stocks a large inventory of equipment for your cryogenic bulk systems and high pressure fill plants.

CRYOGENIC CYLINDER EQUIPMENT

• Short and Long Stem Valves
• Relief Valves
• Regulators and Economizers
• Relief Valves
• Gauges
• Fittings

RELIEF VALVES

• Cryogenic Relief Valves
• ASME Relief Valves
• Noise Reduction Relief Valves
• Right Angle Relief Valves
• Carbon Dioxide Relief Valve

CRYOGENIC GLOBE VALVES

• Long Stem Globe Valve
• Short Stem Globe Valve
• Extended Bonnet Cryogenic Valve
• Brass Angle Globe Valves
• Diaphragm Type Globe Valve

CRYOGENIC GATE VALVES

• Extended Gate Valve
• Short Gate Valves

CHECK VALVE

• Horizontal Lift Check Valves
• Bronze Swing Check Valves
• Spring Loaded Piston Lift Check Valves
• Inline Check Valves

REGULATORS

• Heavy Duty Line Regulators
• Aluminum Line Regulators
• Automatic Changeover Regulator
• Low Pressure Regulators

HIGH PRESSURE VALVES

• Standard Master Valve
• Panel Mount Master Valve

‍

See catalog sheet for full specifications

LPG Propane and Propylene Cylinder Valves for 20lb to 100lb and Lift Truck Sets

ProRack Gas Control Products stocks all the common commercial Propane Valves for 20 lb to 100 lb cylinders, common fork lift sets and Propylene Valves

Propane OPD Valves

These Type 1 ACME valves (CGA791) are intended for DOT cylinders up to 40 pounds LPG capacity (96 pounds water capacity). This valve has a vapor service outlet, relief valve, captive fixed liquid level gauge, and an overfill prevention device (OPD).

KEY FEATURES

• Rapid purging and filling with over one million BTU withdrawal capacity.
• Steel safety cage provides long-term operational protection.
• Tri-lobular one-piece forged aluminum handwheel.
• Double “O-ring” stem seal for improved leak resistance.
• Includes Ever-Seal sealant (pre-applied).
• Quality “O-ring” check valve seat, opens only with positive seal.
• High capacity BTU withdrawal allows fast
• purging and filling.
• Upward spray filling – eliminates premature shutoffs.

‍

Standard Propane Service Valves

These valves are intended for larger cylinders up to 100lb propane capacity. Valves are supplied with a fixed liquid level gauge and 375 relief setting for propane service.

KEY FEATURES

• Double o-ring stem seal for improved resistance to leakage due to dirt or temperature extremes.
• Sturdy quality hand wheel brass handle and stem threads are less likely to be damaged.
• Non-rotating disc eliminates wear and improves service life.
• Standard dip tube length is 10.6. Other sizes are available upon request

‍

Propylene Cylinder Valve for 260 PSIG Service Cylinder

Designed for compliance with CGA Technical Bulletin TB27 - 2007. Recommendations for CG-7 Pressure Relief Valves used in propylene service.

KEY FEATURES

• Robust, durable forged brass body, precisely machined internal components and design elements meet the most stringent valve performance standards.
• Designed for cylinders with pressure ratings such as the 4B-260, 4BA-260, and the 4BW-260 cylinders.
• Pressure Relief Device: 435 - 520 psig Start to Discharge Rate
• Complies with CGA Technical Bulletin TB 27
• Available with a maximum liquid level gauge

‍

Fork Lift Sets for Lift Trucks

Including all parts required for servicing fork lift propane cylinders

KEY FEATURES

• Service Valve for on and off shut off of propane
• Relif Valve
• 10% Bleed Valve
• Gauges
• Double back check filler valves

‍

See catalog page for ordering information

Brass and Stainless Steel CGA Fittings for Cylinder Filling and Cylinder Connections

High quality solid machined brass and stainless steel cylinder connections, adaptors, tees, caps and plugs for various CGA connections are available for all gases.

KEY FEATURES

• Machined brass and stainless steel fittings
• Designed and machined to CGA V1 Standards
• Oxygen Cleaned and bagged
• 3000 to 7500PSI maximum working pressure
• Industrial, Medical and Specialty gases

See catalog sheet for full specifications

Brass and Stainless Steel Pipe Fittings for Assembly of Small Manifolds and Hose Assemblies

High quality solid machined brass and stainless steel tees, crossess, elbows, adaptors and connectors for cylinder connections, manifolds and hose assemblies.

KEY FEATURES

• Machined brass and stainless steel fittings
• Designed and machined to exact standards
• Oxygen Cleaned and bagged
• 3000 to 7500PSI maximum working pressure
• Industrial, Medical and Specialty gases

See catalog sheet for full specifications

Brass Pipe and Manifold Fittings for Assembly of Cylinder Filling and Point of Use Manifolds

High quality solid machined brass and tees, crosses, elbows, adaptors and connectors for assembly of cylinder filling manifold systems

• Machined brass bar stock and forged fittings
• Designed and machined to exact standards
• Oxygen Cleaned and bagged
• 3750PSI to 4350PSI maximum working pressure
• Industrial, Medical and Specialty gases

See catalog sheet for full specifications

Chromed Plated Medical Gas Filling Yokes For Pin Index Cylinders

High quality solid brass forged medical fill yokes with chrome plating for durability. Various CGA connections are available for all medical gases

KEY FEATURES

• All medical yokes are cleaned and packaged for oxygen service
• Available with CGA, 1/4” & 1/2” M.NPT end connections
• Standard T-Handle and Deluxe handtight connections are available
• Special order non-chrome plated all brass yokes available
• All yokes are manufactured for up to 3000PSI service pressure
• Repeatable performance

See catalog sheet for full specifications

Medical Gas Quick Connect Filling Yokes For Pin Index Cylinders

The yoke quick connector type TW42 is especially designed for filling of gas cylinders with Pin-Index system. The connector is very light in weight and therefore easy to operate. Being open at one side makes it easy to connect. Simply place the connector body of the yoke quick connector over the cylinder valve, align it with the index pins and move upwards. The pressure-tight connection is made. The pressure-assisted piston prevents accidental disconnection under pressure and provides additional safety.

TW42 QUICK CONNECT FEATURES

• Connectors for oxygen applications are oxygen cleaned and free of oil and grease.
• For Pin-Index connection CGA870
• Monel vetted piston and full brass, enhances safety (heat sink & spark free)
• Open bow body for connection in seconds
• Pressure-assisted piston prevents accidental disconnection under pressure
• High-grade materials

See catalog sheet for full specifications